All best sellers
  • Banner

  • -15%

Filament PLA - Yellow

AZ PLA Yellow
AZURFILM
Ø
Weight
€22.00
€18.70 Save 15%
Tax included
Quantity

 

Security policy (edit with Customer reassurance module)

 

Delivery policy (edit with Customer reassurance module)

 

Return policy (edit with Customer reassurance module)

rating No review at the moment
Description

PLA starting material for 3D printing (polylactic acid)

PLA (starting material) is gaining increasing popularity due to low printing and interesting visual quality of individual prints. The material is biodegradable and suitable for printing large objects. In addition to ABS, it is the most widely used material for 3D printing, is flexible, hard and durable like other plastics. Prints at temperatures above 60 ° C may lose their mechanical properties.

Recommended print settings:

    Nozzle: 200-220 ° C
    Washer: 50 - 60 ° C
    For sequins, we recommend a nozzle of 0.47 mm or larger.
    -------------------------------------------------- -------------------------------------------------- -------------------------------

ADVANTAGES:

    starting material for 3D printing
    Easy to set up for printing
    biodegradable material
    hardness and toughness
    does not deform (low shrinkage on cooling)
    suitable for printing larger models
    soluble in sodium hydroxide


DISADVANTAGES:

    fragility
    low heat resistance
    

COMPARISON OF ABS AND PLA
In general, 3D printing is primarily dependent on the printing accuracy. The accuracy of printing itself is more or less dependent on proper calibration of the printer itself. For wall printing, a thickness of at least 1 - 2 mm is recommended. With PLA, corners and transitions can be printed more sharply and more accurately than with ABS at lower temperatures. PLA under the same conditions is less resistant to temperatures than ABS. PLA starts to soften at about 60 ° C, while ABS up to about 100 ° C. ABS prints are mostly opaque, PLAs are rather glossy. So if you expect higher temperatures around the final product, then ABS is the better choice. PLA material is biodegradable, while ABS material is not, but can be recycled. PLA is more suitable for use in the food industry.

Product Details
AZ PLA Yellow
9 Items

Specific References

Click here to leave a review

16 other products in the same category:

Follow us on Facebook